Is your company up
to date with OSHA And ANSI regulations regarding the testing of
Vehicle-Mounted Elevating or Rotating Aerial Devices?
OSHA 1910.67(c)(3)
Standard:
"Electrical tests." Electrical tests
shall be made in conformance with the requirements of ANSI A92.2 -
2001, Section 5. However, equivalent DC voltage tests may be used in
lieu of the AC voltage test specified in A92.2 - 2001. DC voltage
tests which are approved by the equipment manufacturer or equivalent
entity shall be considered an equivalent test for the purpose of
this paragraph (c)(3).
ANSI A92.2-2001 Standard:
5.3 Electrical Tests For
Insulating Aerial Devices
...5.3.2 Qualification
Test
Each insulating aerial
device shall be tested in accordance with Section 5.4.2 to insure
compliance with the Electrical Qualification requirements as
appropriate.
If the aerial device is
altered or modified by the installer after the Qualification Test is
performed, the original Qualification Test is not valid.
If not..... Then
let POWER TECH Test and Certify your
equipment.